Analysis of the Usage of Industrial Circulating Water Treatment Chemicals


There is a serious shortage of available water resources on the planet. With the rapid development of the world economy, water shortages have become increasingly serious. In the production of industries such as life and industry, more than 70% of the water is recycled water. It can be seen that the cooling cycle water treatment agent plays an important role in industrial water saving.


The usage analysis of industrial circulating water treatment chemicals is as follows.

1.Chemical analysis

Green water treatment agents are an effective way to ensure the quality of circulating water. The pass rate will be significantly improved in accordance with strict water quality management regulations. The chemical analysis simply provides a way to monitor corrosion fouling.

The total iron content was determined in make-up water and circulating water. Find out the regular changes. At the same time combined with other monitoring methods. It is also possible to understand the corrosion situation of the entire industrial circulating water treatment system.

Control the pH and total alkalinity in industrial circulating water treatment systems. Control corrosion. Monitor fouling. It can be chemically analyzed to form scale ions. By measuring the change in Ca2+ concentration in the water inlet and outlet of the water cooler. It is possible to speculate on the system fouling trend.

2.Hanging sheet corrosion test

The coupon corrosion test is one of the effective methods for the corrosion monitoring of industrial circulating water treatment systems. It is widely used at home and abroad.

The coupons used for the corrosion test should be placed on a dedicated rack. Or placed on the return line of the industrial circulating water treatment system cooling water. The corrosion rate of the carbon steel test piece should be less than 0.10 mm/a. The test period of the coupon is generally 1-2 months.

3.Microbial monitoring

The circulating water stabilizing agent can treat the hazardous slime in the circulating cooling water. Especially for the phosphorus system operation is more important.

Microbial control is one of the keys to success or failure of alkaline industrial circulating water treatment technology. In order to control the mud in the system and prevent the formation of dirt and corrosion under the scale. The industrial circulating water treatment system should regularly carry out sterilization and algae removal and biological slime stripping treatment.

The effect of industrial circulating water treatment is mainly determined by measuring the amount of biological slime and the number of heterotrophic bacteria in the circulating water. A sudden rise in heterotrophic bacteria will cause severe deterioration of water quality. In turn, it affects the heat transfer effect of the water cooler.

At the same time, according to the analysis of the size of the COD content and other indicators to comprehensive analysis to determine whether there is material leakage.

Conclusion

In general, industrial recycling water treatment system pollution monitoring is very important. If there is any problem, it should be handled in time. This will reduce the production of a large amount of biological slime. Minimize the hazard.

Comments

  1. KeshavMay 3, 2019 at 2:32 AM

    Thanks for sharing your insight.Treating waste water is the need of the hour and there are advanced technologies offered by WATER TREATMENT CHEMICAL MANUFACTURERS. Check our range of water treatment chemicals & methods.

    ReplyDelete

Post a Comment

Popular posts from this blog

How to Quickly Dissolve Corrosion Inhibitors

Image
Water Treatment Agents Scale inhibitors are useful as thickeners in the production of perfumes, concrete, construction glues, and the like. However, due to the high viscosity of the thickener, the dissolution time of the thickener will be very long. So, is there a way to dissolve the corrosion inhibitor used as a thickener quickly? 1. Choose powder scale inhibitor ATMP IRO 95% ATMP The scale inhibitor, ATMP acid , is a white solid particle or a powdery polymer. Therefore, when anionic polypropylene is selected as a thickener for the first time, in order to improve the dissolution efficiency, it is preferred to select a powdery ATMP . The scale inhibition inhibitor, the smaller the particle size of the corrosion inhibitor, the shorter the dissolution time. The powder scale inhibitor and the particle scale inhibitor have the same viscosity, molecular weight, and performance index. 2. Keep the water temperature between 20-30 degrees Celsius The stability of the scale inh
Read more

Water Treatment in Thermal Power Plant

Image
Electric power has always been the main clean energy source for economic construction and urban development, and it has attracted much attention. Currently, electric power is mostly generated due to the combustion of fossil fuels with the exception of several other new energy sources. Therefore, the stable operation of large generator sets and related equipment has become a guarantee for the normal operation of electric power production. With the increase in the production efficiency and other functions of such large generator sets and corresponding equipment, the standards for the water quality used are becoming more stringent. With the continuous development of the economy and science and technology, various water treatment technologies and processes are constantly being produced. Meanwhile, there are clear restrictions on water quality requirements in power plant water treatment. For instance, the phosphate content and pH value in water have stricter requirements than before. Fu
Read more